Instructions / Assembly
Page | 4 www.lacrossetechnology.com/support C86224
Backlight (HI-LOW-OFF)
• When operating with the power cable, the backlight is adjustable:
HI-LOW-OFF.
• Press and release the SNZ/LIGHT button to adjust the backlight.
• When operating on batteries only, the backlight will come on
briey when the SNZ/LIGHT button is pressed.
USB Charge Ports
USB Output:
• Charge devices that self-regulate.
• Do not charge multiple devices from the same
USB port.
• For Tablets and other high power devices, use the
USB port on the right (2 Amp).
• Must operate clock with power cable to charge
other devices.
• Plug your device into one of the USB ports on the
front of the clock.
• The clock will show HELLO for 3 seconds.
• The lightning bolt will ash while charging.
• When no device is connected, no battery will show.
• As your device becomes full and less current is
drawn, solid battery icon may show, before the
charge is complete.
Note: The FULL icon will show when full. After charging, the
clock will provide a trickle charge and show the charging icon.
Your device may not show fully charged.
Charging
Not Connected
Full
Not Connected
Included USB to Micro USB or Lightning Cable
• The included USB cord offers a
Micro USB connection or a
Lightning connection on the
same cord.
• Use your own charge cord or
the included cord to charge your
device.
• Place your cord in the handy
hook on the back of the clock.