Installation Guide

ManualsBrandsLa Crosse Technology ManualsHome DecorAtomic Digital Full Calendar Wall Clock with Extra Large Digits

Page 3Page 2

MODEL: C86279V4

DC: 060419

For more product information visit: bit.ly/laxtech_support

ATOMIC DIGITAL WALL CLOCK

WITH CALENDAR & INDOOR TEMPERATURE

QUICK START GUIDE

POWER UP

ATOMIC TIME SIGNAL - WWVB

• Your clock will automatically search for the Atomic Time Signal at

UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• Press the MINUS (-) button to manually start or stop a search for

the WWVB Atomic Time Signal.

• While searching, the Tower Icon will ﬂash. The Tower Icon will

be solid when the WWVB Signal is received by your clock.

• For information about WWVB Atomic Time visit: bit.ly/AtomicTime

SETTINGS

TIME ZONE

AST = Atlantic

EST = Eastern

CST = Central

MST = Mountain

PST = Paciﬁc

AKT = Alaska

HAT = Hawaii

1. Insert the 5 volt power cord into an outlet, then into your

Wall Clock. Optional: Insert 2-AA batteries for backup.

2. Configure your basic settings.

1. Hold the MODE button to enter the Settings Menu.

2. Press the + or - button to adjust values.

3. Press the MODE button to conﬁrm and move to next item.

4. Press the SNOOZE button at any time to exit.

Settings Menu Order:

• Language (English or Spanish)

• Beep ON/OFF

• Atomic ON/OFF

• Time Zone

• Daylight Saving Time (DST) ON/OFF

• 12/24 Hour

• Hour

• Minutes

• Year

• Month

• Date

• Fahrenheit/Celsius

Language: Whichever language is selected, the following

instructions and weekday will be presented in that language.

Atomic OFF: When Atomic OFF is selected, you will move directly

to 12/24 Hour setting.

Weekday: Weekday will set automatically when Year, Month and

Date are set.

Summary of content (2 pages)

PAGE 1
POWE R UP SE T T I N GS 1. Insert the 5 volt power cord into an outlet, then into your Wall Clock. Optional: Insert 2-AA batteries for backup. ATO M I C D I GI TA L WALL C LOCK 2. Configure your basic settings. 2. Press the + or - button to adjust values. 3. Press the MODE button to confirm and move to next item. 4. Press the SNOOZE button at any time to exit.
PAGE 2
BU TTON F U N C T IONS The buttons are located at the top of your clock. ALARM Hold to enter Alarm Settings. Press to activate/deactivate alarm. Press to adjust Backlight HI-LO-OFF. Power Cord required. When alarm sounds Press to Snooze Alarm for 10 minutes. SNOOZE/LIGHT + (PLUS) Settings Menu: Press to increase value. Hold to increase quickly. - (MINUS) Press to start or stop Atomic Time Signal search. Settings Menu: Press to decrease value. Hold to decrease quickly. Hold to enter the Settings Menu.