User manual

Model: W88631 www.lacrossetechnology.com/support Page | 3
Alarm
Bell Icon
SET TIME ALARM
Setting the alarm and activating the alarm are separate actions.
1. Hold the ALARM button for 2
seconds to enter alarm time set
mode.
The letters “AL” will replace the
seconds and the alarm hour will
flash.
2. Press the UP or DOWN buttons
to adjust the alarm hour.
3. Press the ALARM button to
confirm and move to the alarm
minutes.
4. Press the UP or DOWN buttons
to adjust the alarm minutes.
5. Press the ALARM button to confirm and exit.
Note: After 10 seconds the clock will default to regular time
mode.
Alarm Time setting order:
1. Hours, 2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
 Press the ALARM button once to enter alarm mode.
The letters “AL” will replace the seconds
 Press the ALARM button again to activate the alarm.
Once activated, the bell icon appears.
 Press the ALARM button again to deactivate the
alarm. The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
 When alarm sounds, press the SNZ button to silence the
alarm for 10 minutes.
 The snooze icon Zz will flash.
 In snooze mode, press any button to stop alarm for one
day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely if no buttons are pressed.