Installation & Assembly

WIRELESS TEMPERATURE & HUMIDITY
STATION COMBO PACK
QUICK START GUIDE
FIND FULL MANUALS, FAQS, AND MORE UNDER
THE SUPPORT TAB HERE:
http://bit.ly/m82738
Models: 308-1415TH | TX141TH-Bv2 | 308-1409TH
DC: 060818
COLOR DISPLAY 308-1415THPOWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into an outlet, then into your
Color Display. Optional: Insert 2-AA batteries for backup.
3. Insert 2-AAA batteries into your Mini Display.
4. Adjust time and date settings on each display.
5. Once the Outdoor Sensor is reading to each of your
displays, place it outside in a shaded location.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
Outdoor Sensor
TX141TH-Bv2
Color Display
308-1415TH
Mini Display
308-1409TH
OUT
HUMIDITY
IN
HUMIDITY
Time
Month/Date
AM/PM Indicator
Weekday
Indoor
Temperature (°F/°C)
Humidity (%RH)
Outdoor
Temperature (°F/°C)
Humidity (%RH)
SETTINGS
1. Hold the SET button to enter the Settings Menu.
2. Press the + or - button to adjust the values.
Hold to adjust quickly.
3. Press the SET button to confirm and move to the next item.
4. Press the LIGHT button to exit.
Settings Menu Order:
• Language (English, Spanish, French)
• Beep ON/OFF
• 12/24 Hour
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit or Celsius
COLOR DISPLAY BUTTON FUNCTIONS
SET button: Hold to enter Settings Menu.
MINUS button:
• Press to decrease values in Settings Menu.
• While viewing HI/LO records, hold to reset individual records
to current reading, time & date.
PLUS button:
• Press to view Outdoor & Indoor HI/LO Temperature &
Humidity records with time and date.
• Press to increase values in Settings Menu.
• Hold to search for Outdoor Sensor.
LIGHT button:
• Press to adjust backlight 4 levels & OFF.
• While in the Settings Menu, press to exit.
• Hold to set Auto Dim (backlight) times & turn the Auto Dim
ON or OFF.
AUTO DIM BACKLIGHT
1. Hold the LIGHT button to enter the Auto Dim settings.
2. Use the + or - button to turn the Auto Dim feature ON or OFF.
Press the LIGHT button to confirm.
3. If ON was selected, START will flash on screen. Use the
+ or - buttons to adjust your Auto Dimmer’s starting hour.
Press the LIGHT button to confirm.
4. STOP TIME will then begin to flash. Use the + or - buttons to
adjust your Auto Dimmer’s ending hour. Press the LIGHT
button to confirm and exit.
The words AUTO DIM will show in the date area when this
feature is active.
Page | 2 Page | 3 Page | 4 Page | 5
Note: Your weekday will set au-
tomatically after year, month, and
date are set.
Sensor Reception
Buttons