User's Manual

Page| 12
x Press to toggle between the display of seconds or date in the time display
x Press to increase the level of different settings in SET mode
x Press and hold to re-learn the thermo-hygro sensor synchronization
x Press to reset the MIN/MAX record when in MIN/MAX display mode
x Stop the weather alarm during ringing
źDOWN ARROW KEY
x Press to switch the rainfall display mode: Total, 1h, 24h, week, month
x Press to decrease the level of different settings in SET mode
x Synchronize the display with the PC (see Heavy Weather Pro User’s Guide)
x Stop the weather alarm during ringing
ALARM KEY
x Press to enter the time alarm and weather alarm setting mode
x Confirm particular alarm setting
x Press to exit the manual setting mode
x Stop the alarm during the time alarm or weather alarm ringing
x Press to exit max/ min record display mode
x Stop the weather alarm during ringing
MIN/MAX KEY
x Press to display minimum and maximum records of various weather data
x Stop the weather alarm during ringing
LCD SCREEN
When the signal from an outdoor transmitter is successfully received by the
Weather Station, the corresponding
icon will be switched on. (If not successful,
the
icon will not be shown on the LCD). The user can see whether the last
reception was successful (
icon is on) or not ( icon is off). Blinking of the
icon shows that a reception is in process.