FAQ

8 | Page
WHAT IS AUTO DIM BACKLIGHT?
AUTO DIM allow you to set a time for your backlight to dim to level 1 and then return to level 5.
This is a handy feature to dim the backlight at the same time every night for sleep.
Set Auto Dim (Hour only).
1. Hold the AUTO DIM button 2 seconds to enter dimmer set mode. AUTO DIM OFF will show.
2. Press the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3. Press the AUTO DIM button to select start time (Hour) for dimmer. START TIME and the hour
will flash.
4. Press the + or – buttons to change the hour for the dimmer to be low light level.
5. Press the AUTO DIM button to select start time for dimmer to be on High light level.
STOP TIME and the hour will flash.
6. Press the + or – buttons to change the hour for the dimmer to be high light level.
7. Press the AUTO DIM button to confirm exit.
Note: Press LIGHT button at any time to exit dimmer settings.
Note: While Auto Dim is active:
• Press and release the LIGHT button to adjust the backlight for 10 seconds. Intensity Levels:
0FF | 1.5% | 20% | 50% | 100%.
• If you change the backlight setting the station will stay on the new setting and will
automatically go back to the auto dim on the next start point.
WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?
• The day of the week will set when the Year, Month, and Date are set. If your day of the
week is incorrect, yet the month and date are correct, please go the program menu and
check the YEAR setting.
DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?
• Yes, you can select 12 hour or 24 hour time format in the program menu.
TROUBLESHOOTING
HOW DO I CHANGE BATTERIES IN MY SENSORS WITHOUT LOSING
DATA?
We designed this station for convenience, so that a simple change of batteries does not lose
data or require you to power down your station.