FAQ

9 | Page
• When Battery Indicator shows next to the word Outdoor, replace batteries in your Outdoor
Sensor.
• Then hold the SENSOR button for 3 seconds and your station will search for your sensor.
• When changing the batteries in the station, continue using the power cord. After replacing
the batteries, no other action is needed. The batteries in the station only maintain time/date
in the event of a power outage.
FACTORY RESET: HOW DO I FACTORY RESET MY STATION?
• Basically this is a great way to return your station to “out of the box” condition.
• This is more effective than removing all power for clearing out the station.
• All history records will be removed, so write down anything you want to keep.
To factory reset your station:
1. Hold the ALERTS and LIGHT buttons together for 5 seconds.
2. When your station resets it will look for your sensor. Allow at least ten minutes to reacquire
the sensor.
DASHES TEMP/HUMIDITY: WHY DOES MY THERMO-HYGRO SENSOR
SHOW DASHES ON THE STATION?
Dashes indicate the connection is lost between your station and the outdoor sensor.
• My first thought is always to check that my batteries are good. If it has been working and
now is not, low batteries are the most common connection problem.
• Next, check your distance, resistance and interference. If everything was working previously
at the same location, this is likely not the issue. However sometimes there is new growth on
trees or bushes that causing another barrier. Radio Frequency (RF) signal does not travel
well through foliage due to the moisture content.
• Occasionally adding a new wireless electronic device to the home will cross the signal path
for the sensor. If this occurs try moving your station a few feet or turning the station 90
degrees for a better angle to receive the sensor signal.
• When you have good batteries, and good location, hold the SENSOR button for three
seconds to search for your sensor. If you regain connection while the sensor is mounted,
great. If you do not regain connection, bring the sensor within 10 feet of the station and
search again.