Installation Guide

ManualsBrandsLa Crosse Technology ManualsGarden CenterWireless Thermometer with Trend

Page 3Page 2

MODEL: T83622V2

DC: 072818

Full manual can be found under the Support tab here: bit.ly/t83622v2

WIRELESS THERMOMETER

QUICK START GUIDE

POWER UP

1. Install 2-AA batteries into your Outdoor Sensor.

2. Install 2-AA batteries into your Wireless Thermometer.

3. Place your sensor outside in a shaded location.

Sensor mounting video: http://bit.ly/TH_SensorMounting

1. Hold the SET/ºF/ºC button to enter the Settings Menu.

2. Press and release the MIN/MAX/+ button to adjust the values.

Hold to adjust quickly.

3. Press and release the SET/ºF/ºC button to conﬁrm and move

to the next item.

Note: Use one button at a time in Settings Menu.

SETTINGS

Settings order:

• 12/24 Hour Time Format

• Hour

• Minutes

Outdoor Sensor

TX141Bv3

Wireless Thermometer

T83622v2

• Press the SET/ºF/ºC button to select Fahrenheit or Celsius

temperature display.

FAHRENHEIT/ CELSIUS

MIN/MAX TEMPERATURE

• Press the MIN/MAX/+ button to view minimum and maximum

temperatures.

• When viewing minimum and maximum values, hold the MIN/

MAX/+ button to reset them to current readings.

Note: The station will automatically reset these min/max values

daily at midnight (12:00 AM).

TEMPERATURE TREND ARROWS

• Updating every 30 minutes, the Trend Arrows will indicate a

rise or fall (2°F/1°C) in outdoor temperature over the past three

hours.

• If no signiﬁcant change has occurred, a strait or steady arrow

will be presented.

LOW BATTERY INDICATOR

• If a Low Battery Indicator is displayed in the Outdoor

Temperature section, replace batteries in the sensor.

• If a Low Battery Indicator is displayed in the Indoor Temperature

section, replace batteries in the station.

Summary of content (2 pages)

PAGE 1
POWE R UP WI RELES S T HE RMOME T ER QU I CK START GUI DE FAHR E N HE I T / C E L SI US 1. Install 2-AA batteries into your Outdoor Sensor. 2. Install 2-AA batteries into your Wireless Thermometer. 3. Place your sensor outside in a shaded location. Sensor mounting video: http://bit.ly/TH_SensorMounting Outdoor Sensor TX141Bv3 Wireless Thermometer T83622v2 AA AA AA AA 1. Hold the SET/ºF/ºC button to enter the Settings Menu. 2. Press and release the MIN/MAX/+ button to adjust the values.
PAGE 2
SE N S OR W E AT H E R S H IELD- N OT IN CLUD E D • The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. • This shield will offer limited protection from the sun’s heat. • Purchase at: bit.ly/925-1418 WE’ R E H E R E TO HELP ! SPE CIFICAT IONS WARRANTY INFO Indoor: Temperature Range: 32°F to 122°F (0°C to 50°C) Interval: About every 30 seconds CARE + M AINT E NANCE Outdoor: Temperature Range: -40°F to 140°F (-40°C to 60°C) Alkaline Batteries: -20°F to 140°F (-28.