User's Manual
Setting alert value and arming individual alerts are separate functions.
Set alert value:
1. Hold the ALERTS button for 3 seconds to enter alert set mode.
2. The high wind speed alert value will blink in set mode.
3. Press the or buttons to adjust the values.
4. Press the ALERTS button to conrm and move to the next alert.
The alert setting order:
• High Wind Speed (channel 1 only)
• Outdoor Humidity HI
• Outdoor Humidity LOW
• Outdoor Temperature HI
• Outdoor Temperature LOW
• Indoor Humidity HI
• Indoor Humidity LOW
• Indoor Temperature HI
• Indoor Temperature LOW
Note: When using multiple temperature/humidity sensors, press the button
to select the channel (1, 2, or 3) before setting alerts for a sensor.
Model: 327-1414W www.lacrossetechnology.com/support Page | 10
Wind, Temperature & Humidity Alerts
Outdoor HI Temperature
Indoor LOW Humidity
Wind Speed High Alert
Outdoor HI Humidity
Outdoor LOW Temperature
Indoor HI Temperature
Outdoor LOW Humidity
Indoor LOW Temperature
Indoor HI Humidity
Current Wind Speed
The current wind speed which represents a 30 second average of wind speed
samples taken. This should correspond to the wind graph above.