User's Manual

Add on Sensor(s):

1. Slide battery cover down and lift o sensor.

2. Remove old batteries and install fresh “AA” batteries.

3. Hold the button on the weather station for 5 seconds to search for the sensor.

TX141W Sensor mounted:

1. Grab the vented portion of the sensor and turn counter clockwise.

2. Remove old batteries and install fresh “C” batteries.

3. Carefully align and turn clockwise to tighten.

4. Hold the button on the weather station for 5 seconds to search for

the sensor.

Restart

1. Remove batteries from the sensor and batteries and AC adapter from the

weather station.

2. Press any button 20 times.

3. After 15 minutes insert batteries into the sensor, then insert batteries (optional

in the weather station) and plug AC adapter into the weather station.

4. Wait 15 minutes to establish a strong connection. Place sensor outside.

Change Batteries

Model: 327-1414W www.lacrossetechnology.com/support Page | 16

Press the Down Button

on the wind station to

search for sensors

TX141W Sensor Add-On Sensor

1 2 3