User's Manual
Model: 327-1414W www.lacrossetechnology.com/support Page | 4
6. Align the square opening on the pole over the square of the mounting bracket.
7. Turn the knob to tighten the bracket to the pole.
Note: You can attach to a dierent pole (1.2 inches, 3.1 cm diameter) into the
sensor, instead of using the mounting bracket.
Screw until tight.
Do not overtighten.
Sensor Dimensions
(Top View)
Full Sensor and Bracket (with cup) Dimensions:
18.57” T x 7.10” W x 7.10” D (inch dimensions)
4.67
6.74
1.23
2.84
3.54
6.08
2.88
2.42
2.32
18.57
1.43
7.10