WS-7048U WIRED RAIN METER Instructional Manual
Introduction: Thank you for purchasing this innovative Wired Rain Meter for display of rainfall data through a connected wired rain gauge. With two easy to use function keys, this innovative product is ideal for use in the home or office.
Setting Up: Rain Battery Batte Rain Gauge Wire 1. Connect the wire of the rain gauge to the jack of the Rain Meter 2. Observing the correct polarization, insert 2 x AA, IEC LR6 batteries into the compartment at the back of the Rain Meter and replace the cover. 3. All segments of the LCD will light up briefly. Then 0.00 inch or 0.00mm (default in inch units) will be displayed in all 3 counters. If the “0.
Counter Counter Counter Keys Function: The simple design of this product features two RESET keys.
Note: If no rain is recorded during a period of 2 hours the “AUTO” counter will display the last recorded data. The “AUTO” counter will automatically reset to 0.00 inch or 0.0 mm when rain begins again. Auto Off Function: The Rain Meter will automatically power OFF when no rain has been recorded the last 12 hours and no keys have been pressed during that period.
Positioning The Rain Gauge Position the connected rain gauge outdoor to collect rainfall data (maximum length of wire: 33 feet/ 10m). Ensure that the rain gauge is placed in a secure and flat location where it can properly collect properly rain quantity without obstruction. Ensure also that the rain gauge is securely mounted at the appropriate location otherwise it may not transmit accurate rainfall data.
Liability Disclaimer • The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences occurring should an inaccurate reading take place. • This product is not to be used for medical purposes or for public information. • This product is designed for strict home use as an indication of rain quantities and is not 100% accurate. Readouts given by this product should be taken only as an indication and not as being totally accurate.
WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weather station. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the Weather Station in for repairs, contact La Crosse Technology. The Weather Station will be repaired or replaced with the same or similar model.