Atomic Digital Wall Clock with Indoor Temperature & Perpetual Calendar Model: WS-8008U-IT Instruction Manual DC: 081617
Welcome to the La Crosse Technology® family! We hope you enjoy your new Atomic Clock. Table of Contents 2 3 3 4 5 5 6 6 6 7 7 7 8 8 9 Page | 1 Let’s Get Started Buttons Basic Settings Time Zone Fahrenheit | Celsius Alarm Time Activate | Deactivate Alarm Snooze Reset Button Help Us, Help You Let’s Get Social Care and Maintenance Specifications Warranty and Support FCC Statement www.lacrossetechnology.
Lets Get Started 1. Insert 2 AA batteries into your clock. 2. Configure basic settings. Wall Hang AA AA Pullout legs Important: The clock will look for the Atomic time signal for 7 minutes when batteries are first installed. Buttons will not function during the Atomic time signal search. Options: • Press the WWVB SEARCH button once to stop the Atomic time signal search. • Manually set the time, date, and time zone. • The clock will search for the Atomic time signal again after midnight.
Buttons Basic Settings • Hold the SET button to enter time set mode. • Press the ARROW buttons to adjust values. • Press SET to confirm adjustments and move to next item. Settings order: 1. 12/24 Hour Format 2. Hour 3. Minutes 4. Year 5. Month, 6. Date 7. Daylight Saving Indicator (ON to automatically change) Press SET to exit, or wait 30 seconds without pressing buttons to return to the normal time display. Page | 3 www.lacrossetechnology.
12/24 Hour Time Hour Minutes AM AM Year P P Month Date AM P AM P DST Indicator DST P Time Zone • This clock has four time zones to choose from. • The default time zone is Pacific (P) • Press the ZONE button to select your time zone. o P = Pacific o M = Mountain P M o C = Central o E = Eastern C E WS-8008U-IT www.lacrossetechnology.
Fahrenheit | Celsius • Press the ºF/ºC button to switch from Fahrenheit to Celsius temperature display. P P P Alarm Time 1. Hold the ALARM button for 3 seconds until the seconds are replaced by the letters “AL”. 2. The alarm hour will flash. 3. Use the ARROW buttons to set the hour. 4. Press the ALARM button once. The alarm minutes will flash, 5. Use the ARROW buttons the set the minutes. 6. Press the ALARM button to confirm and exit. AM Page | 5 P AM www.lacrossetechnology.
Activate/Deactivate Alarm Setting the alarm time and activating the alarm are separate steps. 1. Press the ALARM button to activate the alarm. 2. Press the ALARM button again to deactivate the alarm. 3. The alarm icon (bell) will appear when active. 4. The alarm icon (bell) will disappear when inactive. Snooze • Press SNOOZE to silence an active alarm for 5 minutes. • The alarm icon will flash. • This is a crescendo alarm that will sound for 120 seconds unless deactivated.
Help Us, Help You! If you have ideas for features or support solutions you’d like to see us make, please let us know! We truly want to make owning a La Crosse Technology product not only a practical experience, but also a fun one. So email us at: store@lacrossetechnology.
Specifications Temperature Indoor Range: 14.1°F to 139.9°F (-9.9°C to 59.9°C) Power Clock: Battery Life: 2 AA, LR6, IEC batteries Batteries not included Up to 24 months with reputable batteries Dimensions Clock: 9.22” L x 1.10” W x 7.38” H (23.44 L x 18.74 H x 2.81 W cm) Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.