Installation Guide

ManualsBrandsLa Crosse Technology ManualsDecor9 in. x 7-1/4 in. Digital Atomic Silver Wall Clock with Temperature

ATOMIC DIGITAL WALL CLOCK

with Indoor/Outdoor Temp

QUICK START GUIDE

Model: WS-8115U

DC:050818

Full Manual can be found under the Support Tab here: http://bit.ly/WS-8115U

ATOMIC DIGITAL WALL CLOCK OVERVIEW POWER UP

1. Insert 2-AAA batteries into the outdoor sensor.

2. Insert 2-AA batteries into the clock.

3. Conﬁgure basic settings.

4. Once the sensor is reading to your clock, place it outside

in a shaded location.

Watch sensor mounting video: http://bit.ly/TH_SensorMounting

SETTINGS

• Hold the SET button to enter the Settings Menu.

• Press the PLUS button to adjust values.

• Press the SET button to conﬁrm and move to the next item

or exit.

Settings Menu Order:

1. Time Zone

2. Daylight Saving Time ON/OFF

3. Language

4. Hour

5. Minutes

6. Year (2 digit)

7. Month

8. Date

9. Weekday

10. 12/24 Hour Format

11. Fahrenheit/Celsius

WWVB ATOMIC TIME SIGNAL

• The WWVB Atomic Time Indicator will ﬂash when searching for

the signal.

• Depending on your location reception may take up to 5 nights.

• When WWVB signal is received, the indicator will be solid.

• For information about WWVB Atomic time visit:

http://bit.ly/AtomicTime

ALARM SETTING

• Hold the ALARM button to enter Alarm Settings.

• Press the PLUS button to adjust values.

• Press the ALARM button to conﬁrm and move to the next item

or exit.

ACTIVATE | DEACTIVATE ALARM

• Press the ALARM button to activate or deactivate the alarm. •

• The Alarm Indicator will display when active.

Note: The alarm will automatically be activated after setting a new

alarm time.

SNOOZE

• When the alarm sounds, press the SNOOZE button to silence

the alarm for 10 minutes. The Alarm Indicator will ﬂash.

• This is a crescendo alarm that will sound for 120 seconds if not

deactivated.

WWVB

Atomic Time

Indicator

Alarm

Indicator

Time Display

Calendar

Display

Indoor

Temperature

Display

(°F/°C)

Outdoor

Temperature

Display

(°F/°C)

Mounting

Hole

Pull Out Legs

Buttons

Note: The

unmarked

circles are

inactive

Battery

Compartment

Page | 2 Page | 3 Page | 4

Reset

SET ALARM PLUS SNOOZE

SET ALARM

Reset

PLUS SNOOZE

Languages:

US English

F French

E Spanish

d German

This clock can be set to

time zone +/- 12 or

anywhere in between.

North American time zones:

-4h ATL - Atlantic

-5h EST - Eastern (default)

-6h CST - Central

-7h MST - Mountain

-8h PST - Paciﬁc

-9h ALA – Alaska

-10h -Hawaiian

Summary of content (2 pages)

PAGE 1
ATOMIC DIGITAL WALL CLOCK OVERVIEW ATOMIC DIGITAL WALL CLOCK with Indoor/Outdoor Temp QUICK START GUIDE WWVB Atomic Time Indicator Alarm Indicator Time Display Indoor Temperature Display (°F/°C) Outdoor Temperature Display (°F/°C) ALARM PLUS SNOOZE Reset Mounting Hole SET ALARM PLUS SNOOZE Reset Model: WS-8115U DC:050818 Full Manual can be found under the Support Tab here: http://bit.ly/WS-8115U Insert 2-AAA batteries into the outdoor sensor. Insert 2-AA batteries into the clock.
PAGE 2
POS ITIO N IN G YOU R S E NS O R • Mount the outdoor sensor on a north-facing wall or in any well shaded area. Under an eave or deck rail is preferred. • The maximum transmitting range to the clock is over 200 feet (60 meters) in open air, not including walls. P OSITIO N IN G YOU R C LOC K • Use the Mounting Hole for placement on a wall. • Use the Pull Out Legs to freely position on a table.