Full Product Manual

POWER UP
1. Select Time Zone and DST ON or OFF.
2. Insert 1 AA battery into your clock. OPTIONAL: Insert 2 AA
batteries in the side compartments, for 3 year battery life.
3. For best reception, place your clock on a wall that faces Ft.
Collins, Colorado. During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the atomic time
signal.
• If no signal, after 8-10 minutes, clock will run from 12:00.
• Clock will continue to search for the WWVB atomic time
signal.
• Allow up to 5 nights for the clock to receive the atomic time
signal.
6
5
SET
RESET
WAVE (Atomic search)
Battery
Time Zone Selector
Daylight Saving Time
Selector
Set Time:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by step.
Note: The atomic time signal will override manual settings.
Reset:
If the clock does not respond when trying to manually set your
time, press the RESET button on the movement case.
4
3
2
1
6
5
4
3
2
1
MANUALLY SET TIME
• In certain areas, your clock may not be able to receive
the atomic time signal due to signal strength or interference.
• In this case, your clock can be set manually and operate as a
quartz clock until the WWVB signal can be received.
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
LET’S BE SOCIAL!
Page | 3Page | 2
AA
AA
AA