Full Product Manual

18” Indoor/Outdoor Wall Clock

Model: WT-3181PLx1-Q

DC: 083117

Power up

1. Insert 1 fresh AA, battery into your clock according to

the polarity marking. The battery is a snug ﬁt.

2. Rotate the time set wheel to set your time.

Position

Indoor: Mount your clock on a wall using the hanging

hole on the back of your clock.

Outdoor: Choose a shaded location with an overhang to

protect the clock from the sun, standing snow

and rain. Sunlight may cause high temperature

readings.

PAGE 1
Power up 1. Insert 1 fresh AA, battery into your clock according to the polarity marking. The battery is a snug fit. 18” Indoor/Outdoor Wall Clock 2. Rotate the time set wheel to set your time. AA Position Indoor: Mount your clock on a wall using the hanging hole on the back of your clock. Model: WT-3181PLx1-Q DC: 083117 Outdoor: Choose a shaded location with an overhang to protect the clock from the sun, standing snow and rain. Sunlight may cause high temperature readings.
PAGE 2
Position Specifications • Your thermometer and hygrometer have been calibrated at the factory and should not need adjustment. Battery Requirements: 1 AA (IEC LR6) required in movement (Alkaline recommended) • To check the sensors accuracy, tune to your local weather forecast broadcast. The sensors may be adjusted.