Model: WT-8002U Instruction Manual DC: 041916 Digital Wall Clock Manual Set Time + Time Alarm with Snooze Month, Date, Weekday + Indoor Temperature °F/°C Pullout Stand 1-AA battery Buttons WT-8002U www.lacrossetechnology.
Get Started 1: Insert 1 fresh AA, LR6 1.5 volt Alkaline battery into the clock according to the polarity markings. 2: Set time, date etc. Restart: If the indoor temperature is not displayed after 60 seconds, remove batteries from the digital clock. Press any button on the digital clock 20 times. After 15 minutes, insert a fresh battery. Set Time, Date, 12/24 Hour 1. Press the SET button to enter time set mode, confirm adjustments and move to next item. 2. Press the +/HR or - ºF/ºC buttons to adjust values.
Snooze • • • • Press SNZ to silence an active alarm for 5 minutes. The alarm icon with SNOOZE below it will flash. This is a crescendo alarm that will sound for 120 seconds if not deactivated. Press any button to stop the alarm for 24 hours. Specifications Indoor: Temperature Range: 32°F to 122°F (0°C to 50°C) Power: Digital Clock 1-AA, IEC, LR6 batteries (not included) Battery Life: Digital Clock Dimensions: Up to 24 months Digital Clock: 8.62" L x 1.29" W x 6.81" H (218.9 x 32.7 x 172.
Product Registration: www.lacrossetechnology.com/support/register Online Product Support: www.lacrossetechnology.com/support FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.