WT-8029U RADIO-CONTROLLED SOLAR CLOCK INSTRUCTION MANUAL Contents Languages Page __________________________________________ English 2 French 18 Spanish 36 TABLE OF CONTENTS Topic Page Features Battery Installation Setting Up Atomic time - WWVB Radio Controlled Time Function keys LCD Screen Manual Settings Alarm setting and snooze Mounting Care and maintenance Specifications Warranty 3 3 5 5 6 7 7 11 12 14 15 16 FEATURES: RADIO-CONTROLLED SOLAR CLOCK: LCD1 display LCD2 display Solar panel Wall M
WWVB Radio controlled time with manual time setting Time display: hour, minute, second 12/24h time format display Alarm setting with snooze function Calendar display Weekday display (4 languages to choose from: English, Spanish, French, German) Time zone setting Daylight savings time ON/OFF option (DST) Solar mode setting Indoor temperature display in ºF/ ºC selectable Indoor humidity display in RH% Primary Alkaline battery or rechargeable Alkaline battery selection Low battery
Use switch to select which type of battery will be used before inserting the battery into the compartment Battery compartment cover Primary Alkaline battery switch position 3. 4. Rechargeable Alkaline battery switch position Insert 1 x AA Alkaline battery into the compartment, observing the correct polarity (see marking inside battery compartment. Replace battery cover DO NOT SET THE CLOCK.
If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all, then please take note of the following: Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 6 feet (2 meters). Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases, please place the unit close to a window and/ or point its front or back towards the Fort Collins, Colorado, transmitter.
TIME ZONE The time zone can be set between the +/–12 hour range in LCD2. To do this: 1. The time zone (LCD2) will start flashing (Default setting "EST -5“). Select the desired time zone by pressing and releasing the + key. Time zone settings: -12, -11, -10, ALA, PST, MST, CST, EST, ATL, -3, -2, -1, 0, +1, +2...+12. (Default: EST) 2. Press and release the SET key to enter the “DST Setting“. DST (daylight saving time) 1. 2. The ON digit will start flashing on LCD1.
MONTH SOLAR MODE 1. The Solar Mode is used for saving the power consumption of the rechargeable battery (Default setting ON): 2. The month digit on LCD2 will start flashing (Default setting 1). Set the desired month by use of the + key. Press and release the SET key to move to the mode “Date Setting”. DATE 1. 2. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired date by use of the + key. Note: The date can only be set in conjunction with the selected month.
5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15 seconds automatic timeout. FOLDABLE TABLE STANDS The foldable table stands legs are located on the backside. Unfold the stands out, below the battery compartment. Once the foldout table stands are extended, place the radiocontrolled solar clock in an appropriate location. TO DEACTIVATE THE ALARM: Alarm icon ((())) (ON) WALL MOUNTING 1. 2. The alarm will be automatically ON when the alarm time is set.
Problem: Solution: Problem: Solution: Problem: Solution: Problem: Solution: 3) Be sure the radio-controlled clock is at least 6 feet (2 meters) from any electrical devices, i.e. TV sets, computers, or other radio controlled clocks. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing any keys. Hour is incorrect (minute and date are correct). 1) Be sure the correct time zone and daylight saving time is selected.
Low battery indicator: RX - Low battery indicator is displayed on the LCD when the battery voltage is low. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product.
