Instructions / Assembly

ManualsBrandsLa Hacienda ManualsOutdoorsCordoba 29.9 in. H x 26.8 in. D Fire Pit in Black Finish and Grills

User Instructions - Please keep for future reference

Cordoba Firepit

Produced in China for La Hacienda UK Ltd

Hangar 27, Site C, Aston Down Airﬁeld, Nr Stroud, Glos, GL6 8HR, UK

www.lahacienda.co.uk

IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.

These instructions form part of the product.

Please take note of all of the safety warnings listed in these instructions.

Please read these instructions in their entirety and retain them for future reference.

These instructions should be stored with the product.

This product is for domestic use ONLY and should not be used commercially or for contract purposes.

57011US

V1.0

8mm

La Hacienda

Tools list

Tools provided

Tools required (not included)

Summary of content (6 pages)

PAGE 1
® La Hacienda Cordoba Firepit User Instructions - Please keep for future reference 57011US V1.0 Tools provided list Tools required (not included) 8mm IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions. These instructions form part of the product. Please take note of all of the safety warnings listed in these instructions. Please read these instructions in their entirety and retain them for future reference. These instructions should be stored with the product.
PAGE 2
Care and safe use guidelines DANGER Plastic bags can cause suffocation. Dispose of all packaging materials properly. Ensure product has a minimum of 7ft overhead clearance and has a minimum of 7ft clearance from any combustible materials or items. DANGER Failure to read and observe all warnings, directions for use and extinguishing may result in unsafe conditions leading to damage to property, injury or death. The assembled product is heavy and once positioned must not be moved whilst in use.
PAGE 3
Care and safe use guidelines For safety reasons, always inspect your product prior to use for signs of fatigue and damage and replace your model as and when necessary. DO NOT use water as this may damage the product. To extinguish unit – stop adding fuel and allow fire to die or douse with sand. Use care when working near fire, do not stand over fire when lighting or during use, loose clothing can catch fire easily. If clothing catches fire always remember to stop, drop and roll.
PAGE 4
Assembly diagram Diagram A 1 2 3 F E 4 5 6 7 B 8 9 F 10 11 A 12 Diagram B 9 13 C D 14 7 15 16 E 8 C 4
PAGE 5
Parts list 1 (2x) 6 (1x) 2 (2x) 11 (1x) 16 (1x) 12 (3x) 17 (1x) 7 (1x) 3 (1x) A (6x) 8 (1x) 4 (2x) B (3x) C (8x) 13 (2x) D (2x) 9 (2x) E (12x) 14 (1x) 5 (2x) 10 (1x) 15 (2x) F (4x) L R Prior to assembly, read the instructions carefully. Check all parts against the parts list. Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
PAGE 6
Care and safe use guidelines WARNING Do not leave the unit unattended while the fire is burning. Note A large fire can damage or shorten the life of the unit. Note Check the product for any signs of damage or disrepair before each use. Note The unit is manufactured with high temperature paint. However, due to the nature of steel, some rusting can occur. This is not a cause for concern and will not affect the performance of your chimenea.