Colton 4pc Seating Set Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 Monday – Thursday, 8AM5PM (EST) Friday, 8AM-4PM (EST) La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc. © 2017 La-Z-Boy Incorporated.
This product is not intended for commercial use and is for residential use only. All warranties are limited and apply to the original purchase only. Proof of purchase is required. Please visit us at www.LaZboyOutdoor.com. There you can review our full warranty details and other helpful information. Or, you may call us at 855-561-6913, 8am-5pm (EST), Monday-Thursday, 8am-4pm (EST), Friday.
F Allen wrench 4mm G Plastic cap 1 12 Assembly Steps: Step 1: Attach leg connector to table leg with bolts and washer. Cover bolts with bolt caps.
Step 2: Attach table leg to table with bolts and washer. Cover bolts with bolt caps. (Figure 2) Figure 2 Step 3: Position the table by turning it upright. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers pressed in place.
Page 2 of 4
Colton 4pc Seating Set Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 Monday – Thursday, 8AM-5PM (EST) Friday, 8AM-4PM (EST) La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc. © 2017 La-Z-Boy Incorporated.
This product is not intended for commercial use and is for residential use only. All warranties are limited and apply to the original purchase only. Proof of purchase is required. Please visit us at www.LaZboyOutdoor.com. There you can review our full warranty details and other helpful information. Or, you may call us at 855-5616913, 8am-5pm (EST), Monday-Thursday, 8am-4pm (EST), Friday.
E Pillow 2 F Allen/Hex head bolt M6*20 5 G Allen/Hex head bolt M6*35 H Washer M6 I Allen wrench 4mm J Plastic cap 2 7 1 7 Page 3 of 5
Assembly Steps: Step 1: Attach legs to chair with bolts and washer. Cover bolts with bolt caps.
Step 2: Position the chair by turning it upright. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers pressed in place.
