Installation & Assembly

Select sectional styles come with hidden connecting brackets, located on the bottom of the
sectional units. The pivoting lock brackets are located under the right side (sitting) of sectional
units without right side arms (F
IGURE 1). The connecting posts are located under the left side
(sitting) of sectional units without left side arms (F
IGURE 2).
1. Arrange the sectional units as desired. Leave approximately a foot between units to be connected.
2. Rotate the pivoting lock brackets to extend from under the unit (F
IGURE 1). The pivoting lock
brackets must be perpendicular to the edge of the unit to engage the connecting posts.
3. Align the connecting posts with the pivoting lock brackets. Push the units together to
connect both sets of brackets (FIGURE 3).
4. To disconnect, lift the end of the unit with the connecting posts from the pivoting lock brackets.
– To reduce the risk of product damage:
• Do not move sectional units while connected together. The purpose of the connecting
bracket system is to connect the units and prevent them from being separated. The
connecting bracket does not provide adequate structural support for the movement
of connected units.
3
2
– To reduce the risk of serious injury or death:
• To prevent suffocation, keep plastic bags away from children.
• Do not sit or lie on mattress of sleep sofa except when it is fully extended. Never close unit
with person or animal inside.
– To reduce the risk of burns, fire or serious injury:
• Always keep open flame and lit cigarettes away from upholstered furniture. Upholstered furniture
may burn rapidly with toxic gas and thick smoke.
• Closely supervise children and disabled persons using this product.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit.
• Do not stand, sit or place extra weight on the arms or back.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• This product is intended for indoor residential use only.
• This product is not intended for use as a health care device.
• Use care when moving the product. Disconnect modular units. Securely grip non-moving parts only.
• Do not stand on stationary ottomans. They are intended only for use as a footrest.
• To avoid tipover, sit in center of chairs and ottomans. Do not rock or sit near edge of stationary product.
• Do not sit or place extra weight on the head area of the sleep sofa mattress. Excess weight can
cause the sleep surface to tip up and back.
• Do not use La-Z-Boy
®
furniture in a recreational vehicle (or other moving vehicle) while the vehicle
is in motion. This furniture is not intended to protect its occupant in an accident. Safely secure
the furniture while the vehicle is in motion to prevent injury or damages from any sudden stop.
DANGER
WARNING
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
Save These Instructions
Sectional Assembly Instructions:
FIGURE 1FIGURE 2
F
IGURE 3
Pivoting Lock
Brackets
Connecting Posts
NOTICE