Submittal Sheet
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117;
7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824;
2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012.
LAARS-STOR
®
SS
Single-Wall Indirect Water Heater
The LAARS-STOR
®
SS Models Feature:
■ Stainless Steel Tank and Heat Exchanger—Made from chromium
molybdenum - titanium ferritic 444 stainless steel alloy.
■ Stainless Steel Heat Exchanger—Single-wall 1" (25mm) O.D. stainless
steel coil. Maximum supply temperature from the boiler must not exceed
240°F (116°C).
■ Factory Installed Sediment Reducing Inlet Tube—Sediment reducing
device that also increases first hour rating of hot water while minimizing
temperature build-up in tank (excluding LS-SS-120-L).
■ Immersed Adjustable Honeywell Aquastat—Supplied with a fast
acting immersion aquastat for automatic temperature control (adjustable
from 80-160°F / 27-71°C).
■ Supply and Return Connections—1" (25mm) NPT female connections
are located on the front for both the boiler supply and boiler return.
■ Insulation System—2" (51mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
■ Potable Water Connections—3/4" NPT (1" NPT on LS-SS-120-L).
■ T&P Relief Valve—Included.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design
(excluding the LS-SS-120-L).
■ AHRI Certified—These water heaters are rated by the Air-Conditioning,
Heating, and Refrigeration Institute to provide accurate performance
data within the standards of the certification. This certification provides a
recognized standard for proper comparison of hydronic appliances.
LS-SS-50-L
Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.
5-Year Limited Tank Warranties on Commercial Models / 1-Year Limited Warranty of Component Parts.
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988
,117;
7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824;
2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012.
LAARS-STOR
®
SS
Single-Wall Indirect Water Heater
The LAARS-STOR
®
SS Models Feature:
Stainless Steel Tank and Heat Exchanger—Made from chromium
molybdenum - titanium ferritic 444 stainless steel alloy.
Stainless Steel Heat Exchanger—Single-wall 1" (25mm) O.D. stainless
steel coil. Maximum supply temperature from the boiler must not exceed
240°F (116°C).
Factory Installed Sediment Reducing Inlet Tube—Sediment reducing
device that also increases first hour rating of hot water while minimizing
temperature build-up in tank (excluding LS-SS-120-L).
Immersed Adjustable Honeywell Aquastat—Supplied with a fast
acting immersion aquastat for automatic temperature control (adjustable
from 80-160°F / 27-71°C).
Supply and Return Connections—1" NPT female connections
are located on the front for both the boiler supply and boiler return.
Insulation System—2" (51 mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
Potable Water Connections—3/4" NPT (1" NPT on LS-SS-120-L).
T&P Relief Valve—Included.
Low Restrictive Brass Drain Valve—Durable tamper proof design
(excluding the LS-SS-120-L).
AHRI Certified—These water heaters are rated by the Air-Conditioning,
Heating, and Refrigeration Institute to provide accurate performance
data within the standards of the certification. This certification provides a
recognized standard for proper comparison of hydronic appliances.
LS-SS-50-L
Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component
Parts.
5-Year Limited Tank Warranties on Commercial Models / 1-Year Limited Warranty of Component Parts.
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
STAINLESS STEEL INDIRECT-FIRED WATER HEATER
LAARS-Stor
®
2018 October and Later. Only for Models LS-SS (30, 40, 50, 75, 120 Gallons).
Submittal Data