Instruction Manual

Page 7
Mascot II
Step 3 SET UP MODE, CONTINUED •With the high outdoor temperature set, press the NEXT button LOD will now appear on the screen. LOD: This is the low outdoor temperature set point used for the reset curve. It is recommended to set it 10 deg. F. above your degree day. •Use the up or down arrows to select the desired low outdoor temperature (LOD), •Press NEXT button The number 1 will now appear on the screen. This is the RMT address. •RMT address: This should always be set for 1, unless cascading multiple
boilers together.
Page 7