Quick Start Guide CA Series CA2402/CA2401/CA1202/CA1201/CA602/CA601 Commercial Amplifier with Energy Star Certification
CA SERIES Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 CA SERIES Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 CA SERIES Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 CA SERIES Quick Start Guide CA Series Hook-up Hook-Up Loudspeakers CM Series Mixer Remote 9
10 CA SERIES Quick Start Guide CA Series Controls Controls (1) (4) (5) (6) (3) (2) (7) (8) (9) (1) EQ knobs – Adjusts the bass and treble for the master output(s). (2) Master volume – Controls the overall output level. The associated LED(s) will light green to indicate active signal, and light red to indicate limiting/protection. (3) Power button – Turns the unit on, force it to stand by. The LED will indicate power status. (4) Mains connector – Connect the IEC cable to a mains outlet.
12 CA SERIES Quick Start Guide 13 CA Series Getting started Welcome to the CA series Quick Start Guide and thank you for purchasing one of these amplifiers. The following accessories should be included with your product: If your rack has rear rails, attach the rear flat brackets by reusing the screws from the chassis. Table/Wall Mounting Mount the CA units into the rack by attaching 4 rack screws through the front angle brackets and rack rails.
14 CA SERIES Quick Start Guide Specifications CA24 02 CA2401 CA1202 CA1201 CA602 CA601 Maximum Outpu t Power 4 or 8 Ω per channel 240 W 120 W 60 W Number of Ouput Channels Number 2 1 2 1 2 1 Minimun Load Impedance 4 Ω mode 8 Ω mode 70 V output mode 100 V output mode 4Ω 8Ω 41 Ω 82 Ω 20 Ω 41 Ω 82 Ω 166 Ω Front Rear Bass Treble ±10 dB @ 100 Hz ±10 dB @ 10 kHz CA1201 CA602 CA601 Power Master Fuse Power consumption 1/8th rated power @4Ω Mains connector >12.
16 CA SERIES Quick Start Guide Other important information Important information 1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting labgruppen.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. 2. Malfunction.
