Manualshelf

Quick Start Guide

ManualsBrandsLab Gruppen ManualsPower Amplifiers8000W Amplifier with 4 Flexible Output-Channels, Onboard Biamp Tesira Integration and Ethernet AVB Audio Networking for Installation Applications
21222324252627282930
11. Product overview
24
D SERIES Tesira Quick Start Guide rev 2.2.0
11.2. Rear panel
1
Amplier Outputs - The amplier output connectors are sturdy terminal block connectors. See Technical
Specications (Section 15) for connector rating. Channels are located from left to right. Each channel has a clearly
marked hot (+) and cold (-) terminal.
2
RJ-45 Ethernet connector for control and Ethernet AVB digital audio network
3
Serial control port on a DB-9 for integration control
4
Terminal block connector for Logic I/O (4 pins of GPIO and a ground). See full Operation Manual for
information on conguration and use.
5
Analog inputs on Tesira Analog version. The analog inputs are available on terminal block connectors with
clearly marked hot (+), cold (-) and ground terminals. The analog inputs can either be used as local inputs to a
Tesira AVB system or as analog failover in case the AVB audio network is interrupted. For more information, please
refer to the full Operation Manual.
6
Mains connector - Detachable Neutrik powerCON. See data sheet for connector rating.
1 2 3 4
6
5
ANALOG OPTION