Owner manual

11. Product overview

D SERIES Tesira Quick Start Guide rev 1.2.0

11.2. Rear panel

1 Amplier Outputs - The amplier output connectors are sturdy terminal block connectors. See Technical

Specications (pages 23-24) for connector rating. Channels are located from left to right. Each channel has a

clearly marked hot (+) and cold (-) terminal.

2 RJ-45 Ethernet connector for control and Ethernet AVB digital audio network

3 Serial control port on a DB-9 for integration control

4 Terminal block connector for Logis I/O (4 pins of GPIO and a ground)

5 Analog inputs on Tesira Analog version. The analog inputs are available on terminal block connectors with

clearly marked hot (+), cold (-) and ground terminals. The analog inputs can either be used as local inputs to a

Tesira AVB system or as analog failover in case the AVB audio network is interrupted.

6 Mains connector - Detachable Neutrik powerCON. See data sheet for connector rating

1 2 3 4

ANALOG OPTION