Brochure

At the heart of IPD Series is the simple GUI of the control software, giving powerful user control over just about every aspect of DSP performance on each device on the
network. Available on PC, Mac and dedicated iPad app, and designed with touch-screen in mind, IntelliDrive Controller gives you the edge when it comes to system tuning.
In Global View, IntelliDrive Controller displays and
identifies all amplifiers connected to the network.
You can name the amplifiers, form or delete
amplifier groups, turn amplifiers on/off or mute/
unmute individually or in groups, and monitor all
levels at a glance.
Global View
In the Levels View, you can set input and output
levels for each channel and set limiter response.
Buttons on each fader block provide quick
access to mute, EQ and delay for each channel
as well as polarity reversal (“Phase Inverted”).
Levels view will differ depending on selection of
stereo or 2-way mode.
Levels View
In this view, you can set the device for stereo or
2-way mode, mix the inputs, and set AES3-to-
analog failover either on or off. A graphic header at
the top of all views shows the amplifier currently
selected, along with ID, power and mute buttons,
and preset store/recall functions.
Input Mixer View
IntelliDrive Controller Software
Intuitive control of powerful DSP