LUCIA Operation Manual

13. LUCIA application browser

LUCIA Operation Manual rev 1.2.0

13.4. Protection mode

mode automatically.

IMPORTANT – Protection mode often results from excessive operating levels, improper load conditions or

14. LUCIA application browser

14.1. Introduction

14.2. Software download and installation

The LUCIA Application Browser software is available for free download from the Support section of the

Lab.gruppen web site. Select Software & Firmware from the left-hand menu. You must be registered to access

the download pages.

Under LUCIA, select LUCIA Application Browser. Follow the on-screen instructions. Note that there is no separate

(desktop, documents) where write privileges are available.

The LUCIA Applciation Browser is a simple, intuitive software editor for configuring the signal matrixing and DSP

features. Amplifier functions are quickly programmed offline and then downloaded to the individual LUCIA units

via the USB port.

Note: Factory presets for common applications include input and matrix settings plus output

equalization pre-optimized for compatible Tannoy loudspeakers and generic loudspeaker types.

All parameters are user adjustable, allowing creation of custom user presets that may be stored

for future use. An online “sync mode” allows real-time setting of parameters – a useful feature for

adjusting loudspeaker response for room acoustics using the four-band parametric equalizers.