Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
102
Lake Controller Operation Manual Rev 1.6.1
EQ/Levels Menu Reference
1. Tap a crossover lter box, then tap CROSSOVER SELECT.
2. Drag the scroll bar left or right, and tap the desired crossover.
3. Tap CROSSOVER SET, then YES to the warning message.
6.4.7.2 HPF Select
This button reads HPF SELECT and is active only when a high-pass lter box is selected. Follow the process
described for CROSSOVER SELECT to set the high-pass lter.
6.4.7.3 LPF Select
This button reads LPF SELECT and is active only when a low-pass lter box is selected. Follow the process
described for CROSSOVER SELECT to set the low-pass lter.
The LPF is enabled via the HPF/LPF FUNCTIONS
menu.
6.4.8 HPF Set/LPF Set/Crossover Set/Filter Bypass/Filter Insert
This button has various states depending on the status of the selected lter. For further details, refer to
section 6.4.7.
6.4.8.1 HPF Set
The button reads HPF SET when a high-pass lter has been selected from the HPF SELECT scroll bar.
6.4.8.2 LPF Set
This button reads LPF SET when a low-pass lter has been selected from the LPF SELECT scroll bar.
6.4.8.3 Crossover Set
This button reads CROSSOVER SET when a crossover lter has been selected from the
CROSSOVER SELECT scroll bar.