Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
Lake Controller Operation Manual Rev 1.6.1
Modules Menu Reference
123
The PLM Series provides a single digital clock, equivalent to the SRC Clock on PLM+, LM and D Series
devices. The MY8-LAKE provides a Primary clock xed to multiples of 48 kHz and an SRC clock xed to
multiples of 44.1 kHz. The LM Series digital clock screens will be used in the examples below.
To access the Digital Clock Conguration window, tap the zoom button located at the top left of the
I/O CONFIG page.
Figure 8-3: LM 44 Digital Clock Summary - I/O Conguration
After tapping the zoom button shown in Figure 8-3 the following screen is displayed:
Figure 8-4: LM 44 Digital Clock Conguration Screen