Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
138
Lake Controller Operation Manual Rev 1.6.1
Modules Menu Reference
PRODUCT DANTE IN DANTE OUT DUAL REDUNDANCY AES67 SUPPORT
Lake LM Series 4 channels 8 channels YES NO
PLM Series 2 channels
2 channels
(unprocessed audio only)
YES NO
PLM+ Series 8 channels
8 channels
(unprocessed audio only)
YES YES
D Series 8 channels
8 channels
(unprocessed audio only)
YES YES
MY8-LAKE N/A N/A N/A N/A
Table 8-3: Dante Input / Output Channels and AES67 support by Product
8.2.5.3 Transmit Tab
When Dante is enabled, by default the device will receive networked audio but will not transmit audio.
Transmission is disabled in order to prevent unnecessary network trafc and unused channels on
the INPUT CONFIGURATION screen of all other devices on the network.
To transmit Dante channels from a device:
1. Tap the DANTE DISABLED button on the DEVICE tab
2. Tap the TRANSMIT tab
3. Tap the TRANSMIT OUTPUTS button
Transmit channels from this device will now appear on the list of all available Dante channels on the
network.
Dante Transmit can be enabled globally for all Dante-enabled
devices in the current system configuration via Home > All >
Global Info > Events & Control > Control > Global Dante Transmit
Enabled control.