Lake Controller Operation Manual

164
Lake Controller Operation Manual Rev 1.6.1
Modules Menu Reference
8.7 Add Page
The ADD PAGE function is always available from the MODULES menu and creates additional pages that
help manage large systems that contain many Module and Group icons.
8.8 Super Modules (LM & PLM Series only)
Super Modules enable the user to control Contour Modules that span multiple Frames (not applicable for
PLM+, D Series or MY8-LAKE) as a single entity in the user interface. A Super Module can be a combina-
tion of two or more processing Modules on the same or different Frames that act together to provide the
same audio processing with exible output routing.
8.8.1 Assigning Super Modules
1. Tap MODULES.
2. Tap a Module on the scroll bar, and place it in the work area.
3. Tap SUPER MODULES from the MODULES menu.
A Venn icon that represents the combination of multiple Modules appears in the scrolling bar as shown
in Figure 8-32.
4. Tap this Super Module icon and place it in the work area.
The icon displays as a Super Module marked as empty.
5. Tap the empty Super Module to select it, then tap ASSIGN MODULE.
A message displays, advising Group assignments of the rst Module assigned to a Super Module will
be transferred to subsequently assigned Modules.
6. Tap the icons for Modules to be included in the Super Module.
The Modules are assigned to the Super Module and removed from the work area. The Modules con-
tained in the Super Module appear in the scrolling bar when the Super Module is selected.