Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
Lake Controller Operation Manual Rev 1.6.1
Module File Types & Lake LoadLibrary™
177
9.5.4 Linear Phase Brick Wall 4-Way
The Linear Phase Brick Wall 4-Way (LP4way) uses the processing power of two Modules to create extra-
steep crossovers.
Figure 9-10: Linear Phase Brick Wall 4-Way
9.6 FIR Module [Lake-enabled Amplifiers Only]
Lake-enabled ampliers (PLM, PLM+ and D Series) support the FIR Module type, which incorporates a
combination of FIR and IIR technology. The extensive FIR lters can be used to create both crossovers and
driver EQ. The phase can be absolutely controlled rendering linear phase, minimum phase, or arbitrary phase
lters. The IIR lters can be used to create classic crossovers and specic driver EQ.
There are some SpeakerPresets in the Lake LoadLibrary that use the FIR module.
FIR modules supports EAW Focusing through direct import of EAW greybox les into the Lake Controller.
The latest EAW greybox les can be downloaded via: http://www.eaw.com/downloads/
The FIR module cannot be created or configured via the
Lake Controller. A third party software plugin is available for the
Lake Controller; please contact Lake support if you are a loud-
speaker manufacturer and would like further information.