Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.6.1
Groups Menu Reference
183
4. Tap ASSIGN to deactivate the function.
Module Group assignments can be veried by selecting a Group icon in the work area. The selected Group
and associated Module icons will display yellow borders as shown in Figure 10-2.
Figure 10-2: Group Assignment Indication
If the Keep Group Assignment function is disabled (default) on the Modules Store/Recall menu, Group
assignments will be lost when a Module is recalled. A warning message will be displayed to conrm this
action.
If the Keep Group Assignment function is enabled on the Modules Store/Recall menu, Group assignments
will be maintained when a Module is recalled.
Modules will not allow assignment of Group/s if it
will result in level limits being exceeded. Warning
messages will be displayed if a Group assignment
would cause the Module to exceed its level limits.
The first Module assigned to the Group will be
used for Group level metering purposes. This
metering assignment can be changed later if
required; please refer to section 6.2.7.
10.4 Label
The Group label is a user-dened value at the bottom of the Group icon that is useful for identifying the part
of the sound system to which the Group communicates (front of house, monitors, down-ll, and so on).
To label a Group, perform the following steps:
1. Tap the desired Group icon.
2. Tap LABEL and enter a Group label.
3. Tap OK.
10.5 Copy/Paste
Select a Group in the work area, and tap COPY/PASTE to view a submenu that transfers attributes between
Groups.