Lake Controller Operation Manual

196
Lake Controller Operation Manual Rev 1.6.1
Pages Menu Reference
14.4.1 Unused
If a Page is labeled #Unused, the label on the tab will turn gray and any modules moved to this page will not
be displayed on the ALL page.
This can be helpful on a system with several 4x module products such as the PLM+ and D Series where
only one or two modules are used; this ensures the ALL page displays only the modules that are in use in
the system.
If the #Unused page is full, create another page and
label by appending a number to the end e.g.
#Unused2 etc.
The #Unused page is automatically created if a
PLM is frame replaced with a PLM+ or D Series if
the “Enable #Unused page” is enabled.
The #Unused page is automatically created if a PLM is frame replaced with a PLM+ or D Series if the
“Enable #Unused page” is enabled.
14.5 Page Delete
This function deletes the selected page, including all Module and Group icons, which return to the Module
and Group scroll bars.
PAGE DELETE is inactive if the MAIN page or the
ALL page is selected..
14.6 Page Add
Tap the ADD PAGE button to add another page to the Lake Controller interface.
14.7 Page Hide
This button is active only in Designer Mode and is used for hiding pages. For further information, please
refer to chapter 19.
14.8 Scrolling Pages
The << and >> buttons on the button bar activate if there are more pages than can t across the screen.
Tap these buttons to view pages that are currently out of view, or use the keyboard TAB key.