Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.6.1
Network Menu Reference
201
15.3.1 Virtual Frames
Virtual Frames can be used while working ofine. A Virtual Frame provides the same functions as online
Modules; Module les can be recalled, stored, copied and pasted, and the Virtual Frames can be stored as
part of a system conguration.
The virtual frame folder contains all congurations of Lake-enabled products to allow for ofine congura-
tion:
Figure 15-3: Virtual Frame Icons
To use Virtual Frames, perform the following steps:
1. Tap the Virtual Frame icon that you require. The cursor will represent the relevant number of Module
icons.
2. Place the Virtual Frame in the work area. The majority of functions are available, enabling full ofine
conguration.
Virtual Frames do not have a device identier, and therefore a replace function is used to assign the Module
to an online Lake device.
Refer to section 4.3 for details about Contour and Mesa Modules.
15.3.2 Replacing Virtual Frames with an Online Device
The MODULE STORE/RECALL or COPY/PASTE/REPLACE functions can be used to transfer the data from
a Virtual Frame to an online Frame.
Individual Modules created ofine can be stored as Module les and recalled into an online device.
Ofine system congurations can be stored and recalled, and then each Frame can be replaced with an
online device.
Please refer to section 8.4.3 for detailed information on the REPLACE FRAME functionality