Lake Controller Operation Manual

312
Lake Controller Operation Manual Rev 1.6.1
Preset Manager
28.4.3.1 Clear Preset [F4]
Deletes the selected presets from the bank le.
28.4.3.2 Rename Preset [F5]
Renames the selected preset in the bank le.
28.4.3.3 Select Multiple [F6]
Allows the selection of multiple items using multiple single tap actions; equivalent to holding down [CTRL]
on a keyboard.
28.4.3.4 Set Bank Password/Change Password [F7]
Sets or changes the password for the selected bank le. When a password is set, a lock icon is displayed
next to the bank le and on any locked Presets. Bank le and Frame passwords follow the same logic.
To remove an existing password, tap
CHANGE PASSWORD, enter the current password,
then tap OK twice.
28.4.3.5 Lock / Unlock Preset [F8]
Locks or unlocks the selected preset/s in a bank le as described in section 28.3.2.7.
28.4.3.6 Exclude / Include Labels [F8]
Sets the Exclude / Include Labels function for the selected Preset/s as described in section 28.3.2.8.
28.4.4 Transferring Presets between Bank Files and Devices
To transfer Presets between Devices and Bank Files, select the Preset/s and drag between column B and
column D as shown in Figure 27-7.