Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
54
Lake Controller Operation Manual Rev 1.6.1
Lake Controller Tutorial
Figure 4-43: Increasing the gain on a Mesa lter
The Mesa lter tool has four dividing lines.
Figure 4-44: Mesa EQ Filter Tool
4. Tap between the center and right dividing lines and drag to the right. This spreads the lter points,
creating a variable-width at top.
Figure 4-45: Adjusting the Mesa lter width
5. Tap and drag to the left of the far-left divider line.
Figure 4-46: Adjusting a Mesa Filter Slope