Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
60
Lake Controller Operation Manual Rev 1.6.1
Lake Controller Tutorial
Figure 4-56: Lake Controller System Conguration File [.csc]
4.7.4 Storing a System Configuration
To store a system conguration le:
1. Tap HOME.
2. Tap SYSTEM STORE/RECALL to display the scroll bar.
3. Tap the STORE SYSTEM button to display the on-screen keyboard.
4. Name the system conguration ‘Example’ and tap OK.
The system conguration is stored and the le is displayed in the scroll bar.
5. Tap the le labelled ‘Example’ to select it.
This activates all recall and store options on the SYSTEM STORE/RECALL button bar.
▸ RECALL AS NEW SYSTEM clears current conguration and loads the selected conguration.
▸ RECALL AS SUB-SYSTEM retains the current conguration and appends the selected conguration.
▸ RECALL COMPARE allows a comparison between the data stored on le and the current system
conguration.
▸ RECALL AS VIRTUAL SS (Sub System) loads the data from the le into a virtual ofine system, append-
ing it to any currently recalled system conguration.
▸ STORE SYSTEM stores the entire conguration.
▸ STORE SUB-SYSTEM stores only the data in the selected Modules and Groups.