Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
80
Lake Controller Operation Manual Rev 1.6.1
EQ/Levels Menu Reference
On a BLEQ overlay the EQ lters are linked together, creating bands. Changing one band will also change
the linked neighboring lter(s). By default, the BLEQ overlay has three bands. Any band can be split into two
bands making it possible to create up to eight bands.
When fewer bands are required, bands can be merged together. Select a band and then tap MERGE TO
RIGHT to merge the selected band with the band to the right; MERGE TO LEFT will merge the selected
band with the band to the left. The MERGE TO LEFT and MERGE TO RIGHT functions replace the
FILTER DELETE function for this overlay type.
Label Function Description
A
Frequency Lock
A/B
Filter Edit
Refer to section 6.3.6 on page 82.
B Filter Box
Displays the gain value of each band or the frequency & band-
width of the currently selected band.
Tap a lter box containing a single gain value to select a particular
band.
Double-tap the lter box to switch to Fine Adjustment mode.
Drag the lter box down to bypass the band.
Drag the lter box up to insert the band.
C
Merge to Left
Split Band
Merge to Right
Functions to combine or split the selected band
D Frame and Module Label Displays the currently selected Frame and Module labels.
E Filter Shape EQ Curve
The selected band is highlighted in light blue. The overall EQ
curve is identied by a white line.
F EQ Tool (Left Side)
Adjusts the lter bandwidth for the low-freq lter for the selected
band (and any adjoining lter)
G EQ Tool (Left Outer)
Adjusts the centre frequency of the low-freq lter for the selected
band (and any adjoining lter)
H EQ Tool (Centre)
Adjust the centre frequency of both lters for the selected band
(and any adjoining lters)
I EQ Tool (Right Inner)
Adjusts the centre frequency of the hi-freq lter for the selected
band (and any adjoining lters)
J EQ Tool (Right Outer)
Adjusts the lter bandwidth for the hi-freq lter for the selected
band (and any adjoining lter)
K EQ Menu Button Bar
The functions and submenus available on the EQ overlays are
described in the following sections.
Table 6-3: Function Descriptions for Band Level EQ Screen