Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Global Events and Control
- 24. Keyboard Shortcuts
- 25. External Control Interfaces
- 26. Command Line Options
- 27. Firmware Update
- 28. Preset Manager
- 29. IP Address Reference
- 30. Corporate Information
90
Lake Controller Operation Manual Rev 1.6.1
EQ/Levels Menu Reference
The FILTER EDIT box of a bypassed lter is positioned slightly lower than an active lter’s edit box and does
not have a yellow border when selected.
A filter can be bypassed/inserted by dragging the
filter edit box down (bypass) or up (insert).
6. 3.12 Filter Flat
Tap FILTER FLAT to atten the selected lter. This sets the lter gain to zero, but frequency and bandwidth
remain unchanged.
FILTER FLAT is inactive if the selected overlay does not contain any lters.
6. 3.13 Filter Delete
Tap FILTER DELETE to remove the selected lter from the overlay.
A PEQ filter can be deleted by dragging the filter box
upward off the screen
FILTER DELETE is inactive if the selected overlay is a:
▸ Graphic EQ, because its lter points are xed and cannot be deleted
▸ Parametric EQ overlay without any lters
6. 3.14 Analyzer Tap to Search
The Lake Controller can interface directly with certain audio analyzer software programs that are installed on
the same computer, or on another computer on the same network.
When the analyzer is enabled, and a compatible audio analyzer is online and on the same network, the
Lake Controller provides spectrum, spectrograph, and transfer function displays on the XOVER, Aux, and EQ
overlays.