Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.8
EQ/Levels Menu Reference
103
Because a different process is used to calculate output-specic EQ, the Mesa lter is not available. How-
ever, in addition to low-shelf, high-shelf, and Parametric lters, the Auxiliary Output Modules provide both
low-pass and high-pass lters. In Designer Mode, all-pass lters are also available.
6.5.1 Auxiliary Output Module Types and Combinations
This section describes the available Auxiliary Output Module types along with the combinations of Modules
that are allowed.
6.5.1.1 One Auxiliary Output
The 1-Auxiliary Outputs Module is automatically recalled into Module B/D when a Classic 5-Way Module is
recalled into Module A/C. This Module type cannot not be used in Module A/C.
6.5.1.2 Two Auxiliary Outputs
The 2-Auxiliary Outputs Module may be recalled into any Module. The other Modules of the Frame may
contain any Classic or Linear Phase Module that uses two or three output channels.
6.5.1.3 Three Auxiliary Outputs
The 3-Auxiliary Outputs Module may be recalled into any Module. The other Modules of the Frame may
contain any Classic or Linear Phase Module that uses two or three output channels.
6.5.1.4 Four Auxiliary Outputs
The 4-Auxiliary Outputs Module may be recalled into Module A or C. When loading this Module type, and
option to load either the Classic 2-Way or 2-Auxiliary Outputs Module into Module B/D will be provided. No
other combinations are allowed.
6.5.1.5 Five Auxiliary Outputs
The 5-Auxiliary Outputs Module may be recalled into Module A or C. When loading this Module type, the
1-Auxiliary Outputs Module will be recalled into Module B/D. No other combinations are allowed.
6.5.1.6 Six Auxiliary Outputs
The 6-Auxiliary Outputs Module uses two Modules (A&B, or C&D). This Module type can only be recalled
into Module A or C.