Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.8
EQ/Levels Menu Reference
107
Figure 6-23: Selecting a new filter slope for HPF or LPF
To protect loudspeaker drivers, the audio output for
the affected channel is muted momentarily while
the settings are changed.
5. Select the HPF by tapping its lter box located top left of the screen.
6. Select the 18dB BUTTERWORTH lter from scroll bar.
7. Tap FILTER SET, then YES to the warning message.
8. Tap AUX OUTPUT EXIT to return to the EQ/LEVELS menu.
Steep high-pass and low-pass filters (48 dB) require
more EQ resources than shallower slopes (6 dB).
6.5.5 Auxiliary Output Menu Options
The menu options shown in Figure 6-24 are available when an EQ lter is selected on an Auxiliary Output in
the EQ/Levels section of an Auxiliary Output Module.
Figure 6-24: Auxiliary Output Button Bar
A summary of the functions relevant to Auxiliary Outputs is shown below; many are identical to those used
on the EQ and XOVER screens.
6.5.5.1 Home
Navigate back to the HOME menu.