Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.8
EQ/Levels Menu Reference
109
Figure 6-25: Aux Output Functions Menu
6.5.5.10 Home
Navigate back to the HOME menu.
6.5.5.11 Aux Output Properties
Provides a submenu containing EQ Preferences. Access control functions such as AUX OUTPUT HIDE and
AUX OUTPUT VIEW ONLY are available only in Designer Mode. Please refer to chapter 19.
6.5.5.12 Aux Output Exit
Navigate back to the main EQ/Levels menu.
6.5.5.13 Filter Select
When selected (orange), a scroll bar is displayed with available high-pass and low-pass lters. Available only
when a high-pass or low-pass lter is active and selected; not applicable to EQ lters
6.5.5.14 Filter Set
Available only when a high-pass or low-pass lter is selected on the FILTER SELECT scroll bar.
6.5.5.15 HPF Enable
The high-pass lter is disabled when this button is blue, and enabled when orange.
6.5.5.16 LPF Enable
The low-pass lter is disabled when this button is blue, and enabled when orange.
6.5.5.17 Aux Output Copy
Tapping this button copies the settings of the currently selected output.