Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.8
Modules Menu Reference
165
To congure routing for a Super Module:
1. From HOME, tap MODULES.
2. Select a Super Module in the work area.
3. Tap SM ROUTING.
Figure 8-33 shows the SM ROUTING screen for a stereo Classic 4-Way conguration split across two
Lab.gruppen PLM 10000Q ampliers. The sub and low channels are being driven by one amplier in
Bridged Mode, and the mid and high channels by a separate amplier in normal mode.
Figure 8-33: SM Routing Screen
With this Super Module conguration, two 4-Way speakers can be controlled simultaneously via one Super
Module icon, with all changes to levels, EQ and crossover being duplicated in real time across both ampli-
ers.
The DESTINATION arrow icons enable selection of available output types. The magnifying glass icon
navigates to the I/O CONFIG screen of the associated Frame. Please refer to section 8.2 for further
details.