Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
174
Lake Controller Operation Manual Rev 1.5.8
Module File Types & Lake LoadLibrary™
9.4.6 Classic 6-Way/6-Auxiliary Outputs
The Classic 6-Way (CL6way) or 6-Auxiliary Outputs (6aux) Modules use a single Module input mix with the
output split to all six output channels.
Figure 9-7: Classic 6-Way
9.5 Linear Phase Crossovers
Linear phase modules utilize FIR lters to create steep transition slopes to divide the frequency bands. The
phase response of all channels summed together is at and therefore all frequencies are equally delayed
which results in no phase distortion. Linear phase crossovers are available as 2-, 3-, and 4-Way Module
types.
9.5.1 Linear Phase 2-Way (+1-Auxiliary Outputs)
The Linear Phase 2-Way (LP2way) provides an auxiliary channel with traditional HPF/LPF for each Module
(LP2w+1a). The Auxiliary channel can be fed post-input EQ, post-input EQ and delay, or from an indepen-
dent Input Mixer.