Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.8
Analyzer Plug-in
215
Figure 18-8: Spectrograph measurement mode
18 .4.3.1 Colormap Range
The magnitude range of the Spectrograph colormap is displayed on the top of the Spectrograph display. Two
edit elds are provided to adjust the minimum and maximum range values for the colormap. To adjust a
value tap either eld to display the on-screen keyboard.
Figure 18-9: Colormap range
18.4.3.2 Speed
Two buttons are provided to increase or decrease the speed of the Spectrograph. By adjusting the speed of
the Spectrograph, you can increase or decrease the amount of time it takes for data to traverse the display.
Figure 18-10: Speed controls