Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
248
Lake Controller Operation Manual Rev 1.5.8
Designer Mode Menu Reference
Figure 19-17: Polarity Locked
Designer worksheets are not available in User Mode, and in the example shown in Figure 19-17, only the
input and low output polarity buttons will be visible.
19.4.6 PEQ - Design
The PEQ-DESIGN worksheet displays the details for each PEQ overlay for the selected Lake device. Table
19-6 shows the available PEQ type abbreviations, descriptions, and default values.
Table 19-6: PEQ Types
EQ TYPE DESCRIPTION GAIN FREQUENCY BANDWIDTH
LS Low Shelf 0 dB 125 Hz 1.9
BP
Band-pass
(Parametric)
0 dB 500 Hz 0.33
ME Mesa Filter
0 dB 830 Hz 0.33
0 dB 1.2 kHz 0.33
HS High Shelf 0 dB 8 kHz 1.9
The extra fields for the Mesa filter can only be
edited when a Mesa filter type is entered.
19.4.7 GEQ - Design
The GEQ-DESIGN worksheet displays the details for each GEQ overlay for the selected Lake device, includ-
ing the gain value of each GEQ lter and the bypassed/inserted status of each lter and each overlay.
19.4.8 BLEQ - Design
The BLEQ-DESIGN worksheet displays the details for each BLEQ overlay for the selected Lake device.
Table 19-7 shows the available BLEQ type abbreviations, descriptions, and default values.