Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.6.0
Preset Manager
309
27.3. 2 Storing a Preset
To store the current conguration as a preset on an online Frame:
1. Select an empty slot in column D, and tap STORE PRESET [F2].
2. Enter a name in the popup window, and tap OK.
The current conguration is now stored as a preset on the selected Frames.
Figure 27-3: List of Presets for Selected Frame
When an existing preset is selected, functions available are:
27.3. 2.1 Recall Preset [F1]
Loads the selected preset as the current conguration for selected Frames.
27.3.2.2 Store Preset [F2]
Stores the current conguration as a preset on the selected Frames.
27.3.2.3 Clear Preset [F4]
Clears the selected presets on the selected Frames.