Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.6.0
Preset Manager
311
To remove an existing Frame password, select the
Frame, tap CHANGE PASSWORD, enter the current
password, then tap OK twice.
Figure 27-5: Online Frame with Locked Presets and Password Removed
The open green lock displayed in Figure 27-5
identifies the preset is locked but no password is
set. Setting a FRAME PASSWORD will lock the
preset again.
27.3.2.8 Exclude/Include Labels [F9]
Presets may be set to exclude the Frame label and Dante device name by using the EXCLUDE LABELS
function. When the Exclude Labels function has been activated for a Preset (indicated by a crossed tag icon
as shown on Presets 2+4 in Figure 27-5), the Frame label and Dante device name will not be changed from
the existing setting when the Preset is recalled.
The Exclude/Include Labels function works on individual and multiple presets in bank les and online frames
based on the currently selected preset or presets.
This function is available only via the Preset Manager utility, but the Exclude Labels status for each Preset is
visible via the Lake Controller as shown in Figure 7-3 on page 116.
By default Presets are set to Exclude Labels when being transferred
between a bank file and an online frame. If the Frame label and Dante
device name is specifically required, use the Include Labels function to
manually change this setting per Preset.
27.4 Working with Bank Files
A bank le is a software le, stored on a computer or external storage device, that contains the details for all
presets on a device. It can be used as a backup le, as well as to transfer presets between devices. For LM
and PLM Series devices, a bank le is specic to each device type; for PLM+ and D Series devices the bank
les are compatible across all device and model variations.